heat shrink tubings hs100 series page <1> 05/04/12 v1.1 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk features: ? semi-rigid, adhesive lined, polyolefin tubing ? 3:1 shrink ratio ? splash-resistant, moisture-resistant covering ? rugged protection against abrasion, vibration and flexing ? excellent strain relief and insulation of weak points ? operation temperature range : -55c to 125c dimension table dimensions : millimetres size (inches) inside diameter recovered wall thickness as supplied maximum after recovery total wall after heating meltable wall after heating 1/8 3.2 0.4 1 0.95 0.35 3/16 4.8 0.4 1.6 1.1 0.5 1/4 6.4 0.4 2.2 1.2 0.6 3/8 9.5 0.4 3.2 1.4 0.65 1/2 12.7 0.8 4.2 1.5 0.75 3/4 19.1 0.1 6.3 2 0.9 product properties property (units) test method requirement physical tensile strength (psi) astm d638 1,500 min. elongation (%) astm d638 300 min. cold impact (-55c) astm d746 no cracking heat shock (250c, 4 hrs) ams-dtl-23053 no cracking secant modulus (psi) astm d882 25,000 max. longitudinal change (%) ams-dtl-23053 5 electrical dielectric strength (volts / mm) astm d876 1,500 min. volume resistivity ( ? -cm) astm d876 1 10 14 chemical corrosion ul224 no corrosion water absorption (%) astm d570 2 max. fluid resistance (23c, 24 hrs) - good flammability ul224 pass
|
